自動變速箱常見的型式分別是AT(液力自動變速箱)、CVT(機械無級自動變速箱)、AMT(電控機械自動變速箱)這三種型式，這三種形式的維修步驟是大體一致的，今天濟南自動變速箱維修為大家講解一下自動變速箱維修的要點。
The common types of automatic transmission are at (hydraulic automatic transmission), CVT (mechanical continuously variable automatic transmission) and AMT (electronically controlled mechanical automatic transmission). The maintenance steps of these three types are basically the same. Today, Jinan automatic transmission maintenance will explain the main points of automatic transmission maintenance.
自動變速箱維修主要分為四步:
Automatic transmission maintenance is mainly divided into four steps:
一、拆卸前的準備工作，只有做好準備工作，才能更好的維修，首先查對變速箱型號，了解一下易損部件，并且要了解自動變速箱的整體情況；
1、 The preparation before disassembly, only good preparation, can better maintenance, first check the gearbox model, understand the vulnerable parts, and to understand the overall situation of the automatic gearbox;
二、從車上拆下變速箱，自動變速箱體積較大，整體拆卸時要注意用對方法；
2、 When the gearbox is removed from the vehicle, the volume of the automatic gearbox is large, so attention should be paid to the correct method when it is removed as a whole;
三、變速箱的解體裝合，在自動變速箱解體時，要準備好盛放小零件的盒子，以防丟失小零件，再者，要記錄好拆卸步驟，以便安裝時，出現差錯；
3、 For the disassembly and assembly of the transmission, when the automatic transmission is disassembled, the box containing small parts should be prepared to prevent the loss of small parts. In addition, the disassembly steps should be recorded in order to avoid errors in the installation;
四、是變速箱的裝合，要按照拆卸時記錄的步驟裝合，濟南自動變速箱維修：記得螺絲要擰緊。
4、 Is the gearbox assembly, according to the disassembly steps recorded assembly, Jinan automatic transmission maintenance: remember to tighten the screws.
如果您對自動變速箱不是很了解，濟南自動變速箱維修建議您去變速箱維修廠家，請人員幫您維修，這樣在維修過程中是不易出差錯的。
If you don't know much about automatic transmission, Jinan automatic transmission maintenance suggests that you go to the transmission maintenance manufacturer and ask professional personnel to help you repair, so that it is not easy to make mistakes in the maintenance process.
