There is no way to change the oil by gravity when the vehicle is started. As long as the car is stopped and started, the impurities in Jinan transmission oil will immediately precipitate to the bottom of each part. Therefore, there is always no way to discharge some impurities deposited at the bottom of the mechanical parts of the gearbox out of the gearbox. Let's introduce this method in detail.

重力換油：重力換油是指，擰開車的變速箱上的放油螺?？恐亓Π炎兯傧渲械呐f變速箱油排出來。放油時，用量杯接住放出的變速箱油。然后，擰好放油螺絲，給變速箱加滿變速箱油。加入的新的變速箱油要比放出的變速箱油要多一點。這樣方便檢查變速箱油位。這種換油的方法適合所有的變速箱進行換油保養。

Gravity oil change: gravity oil change refers to screwing the oil drain screw on the transmission. The old transmission oil in the transmission is drained by gravity. When draining the oil, the measuring cup shall catch the drained transmission oil. Then, screw the oil drain screw and fill the transmission with transmission oil. Add a little more new transmission oil than drain the transmission oil. This makes it easy to check the transmission oil level. This method of oil change is suitable for oil change maintenance of all gearboxes.

優點是：操作方便，沒有經驗也是可以完成的。缺點是：換油換的不全部干凈。重力的方法換變速箱油，只能換出變速箱中大約百分之四十左右的舊油。而且，重力換油只能在沒有啟動車的情況下操作。所以，會有一部分機械磨損的鐵屑，雜質，因為車沒有啟動，殘留在各個機械零件的底部，沒有辦法全部干凈的排除變速箱。

The advantage is that it is easy to operate and can be completed without experience. Disadvantages: not all oil changes are clean. When changing the transmission oil by gravity, only about 40% of the old oil in the transmission can be replaced. Moreover, gravity oil change can only be operated without starting the vehicle. Therefore, there will be some mechanical wear iron scraps and impurities. Because the car is not started, they remain at the bottom of all mechanical parts. It is impossible to completely clean the gearbox.

重力換油適用于：所有變速箱換油保養。循環機換油：循環機換油：循環機換油是借助散熱油管來完成給變速箱換油保養的。把循環機和兩個接頭分別和兩根散熱油管接好。把新的變速箱油加入循環機內部。調整好循環機，啟動車，就可以更換變速箱油了。

Gravity oil change is applicable to: all gearbox oil change maintenance. Oil change of circulating machine: oil change of circulating machine: oil change of circulating machine is to complete oil change and maintenance of gearbox with the aid of cooling oil pipe. Connect the circulating machine and the two connectors with the two cooling oil pipes respectively. Add new transmission oil into the circulating machine. After adjusting the circulating machine and starting the vehicle, the transmission oil can be changed.

汽車換變速箱油之重力換油方法的介紹內容就到這里了，您如果有什么疑問或者需求就來我們網站http://www.mmolords.cn咨詢了解吧。

That's all for the introduction of gravity oil change method for changing transmission oil. If you have any questions or needs, please come to our website http://www.mmolords.cn Consult and understand.